







Free design consultation - KraftMaid and Wellborn cabinet lines, Cambria and Silestone surfaces, and every tier from refacing to full custom laid out side by side
Fast, Reliable Cabinet Installation Across Henderson
If your Henderson kitchen still has the oak boxes or peeling thermofoil doors it was built with, new cabinetry changes how the whole room works – storage, sightlines, and the surface your countertops will sit on. We’re a kitchen-focused team, which means cabinet installation is a core competency for us, not a sideline we hand off. Our technicians have up to 14 years of experience, and we bring that to kitchens from Green Valley to older pockets near downtown. Call (833) 620-5631 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Henderson Homeowners Call Kitchen Remodel North Las Vegas for Cabinet Installation

Henderson rewards a specialist. The city’s housing splits cleanly in two: original 1990s and early 2000s tract homes across Henderson that still wear their builder-grade oak cabinets and laminate counters, and the high-end custom homes where buyers expect high-end surfaces and appliances. One block can call for a refaced 1990s box and the next a full custom build. Because cabinets are the only thing we install, we read that split fast and don’t try to sell the same package to both.
That focus is why Henderson customers keep calling us back. We carry KraftMaid and Wellborn side by side, so the cabinet decision is yours instead of ours. We pair them with Cambria, Silestone, or Caesarstone surfaces and Kohler, Moen, or Blanco sinks and fixtures, keeping the finish work on the same level as the cabinetry. Our reputation here is built on kitchens only, and Henderson homeowners feel that focus in the estimate, the schedule, and the install itself.
Styles & brands we work with
- Shaker
- Modern flat-panel
- Two-tone cabinets
- KraftMaid
- Cambria quartz
- Butcher block
- Open shelving
Our Cabinet Installation Services in Henderson
Most Henderson cabinet projects fall into one of three tracks. We’ll tell you which one fits your kitchen, and why.
Cabinet Refacing
Refacing keeps your existing boxes and swaps the doors, drawer fronts, and veneer. It’s a strong fit for Henderson’s original oak cabinets when the frame and shelf structure are still sound, and it’s quicker and less disruptive than a full tear-out. If your current layout already works, refacing gets you a modern look without moving plumbing or counters. We’ll inspect the boxes first and be honest if they aren’t worth saving.

Full-Overlay Doors
Full-overlay doors cover more of the cabinet face, cutting down exposed gaps and giving Henderson kitchens a cleaner, more finished line. They work especially well in the smaller galley layouts common in older homes near downtown Henderson, where every inch of visual space counts. Choose from KraftMaid or Wellborn and we’ll walk you through flat, shaker, and raised-panel options that hold up to desert conditions.

Soft-Close Hinges
Soft-close hinges stop doors from slamming and take the strain off boxes that are already decades old. In Henderson’s dry air, hinge points are often the first thing to loosen as wood shrinks, so upgrading hardware during an install protects the investment. It’s a small add that makes the whole kitchen feel newer the week you move back in.

Cabinet Box Replacement
When the boxes themselves are swollen or warped, we replace them. In Henderson this usually means moving to plywood construction and heat-resistant finishes rather than the thermofoil our suppliers see fail on sun-facing walls. We coordinate the install with countertops and fixtures under one scope, so you aren’t managing three different trades.
Trusted Brands We Service in Henderson
We build Henderson kitchens around brands that back their products for the long run. Cabinetry comes from KraftMaid and Wellborn. Surfaces are Cambria, Silestone, or Caesarstone, and sinks and fixtures are Kohler, Moen, or Blanco. We don’t claim to stock these locally; we specify them per project and work to the manufacturer’s lead times, so you’ll get an honest timeline in your written estimate. Because we work with these lines regularly, we can compare styles, construction, and price across them without pushing a single brand. What matters is that the doors, surfaces, and fixtures are chosen together, not pieced in over time.
See the difference
Before
After
Before
After
Before
AfterCommon Cabinet Installation Problems We See in Henderson Homes
The desert is hard on cabinetry in ways coastal guides never mention. Here’s what shows up again and again.
- Thermofoil delamination on west- and south-facing doors. In Henderson’s 89012 and 89052 areas, west-facing kitchens can push past 120°F near the glass, and the film peels while the MDF core swells – often on that one wall while the rest of the kitchen looks fine. The fix is plywood construction and a heat-resistant catalyzed lacquer or marine-grade paint.
- Shrinkage and cracking from dry air. Henderson’s single-digit humidity shrinks wood, opening gaps at miter joints and the toe-kick. Cabinets need to acclimate on site for at least 72 hours before install, and moisture-tolerant shims and sealants prevent cracking later.
- Sagging shelves in original 1990s oak cabinets. Builder-grade shelves weren’t built for heavy dinnerware, and in the tract homes of 89002 and 89014 the shelf pins and hinges are often the first failure. New boxes with better bracing solve it.
- Warped laminate counters over failing cabinets. A tired countertop can hide a worse problem underneath – delaminated edges and swelling at the sink base. Replacing cabinets is the moment to address both.
A typical Henderson cabinet installation problem starts with thermofoil doors on a west-facing wall: the film peels and the core swells after years of intense heat at the glass. The usual fix is to swap those boxes for plywood construction with full-overlay doors, and to add ventilation or solar film so the next set lasts. Henderson’s solar orientation is the single biggest factor in how long cabinets live on one wall versus another.
Pricing for Cabinet Installation in Henderson, NV
Cabinet installation in Henderson runs an estimated $3,720 to $12,090, and that range reflects real differences in scope – how many boxes, whether the layout moves, and which door construction and finish you choose. Refacing stays toward the lower end; a full replacement with plywood boxes and heat-resistant finishes sits higher. Brands don’t all cost the same either, which is exactly why we carry KraftMaid and Wellborn together: you see the trade-offs before you commit. A written line-item estimate sets the final price, and the estimate is free. Call (833) 620-5631 for yours.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $3,720 – $12,090 |
We Also Serve Cities Near Henderson
We work throughout the Henderson area and the surrounding cities, including Boulder City, Whitney, Paradise, and Enterprise. Our cabinet installation scope and brand lineup are the same wherever the kitchen sits. If you’re in one of the nearby communities and your cabinets need attention, the process is identical – free estimate, written line items, one team handling boxes, surfaces, and fixtures.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Cabinet Installation in Henderson

Because the sun hits that wall hardest. In Henderson’s 89052 and 89012 areas, west-facing kitchens can reach 120°F near the glass, which accelerates thermofoil delamination and warps laminates on that wall alone. The fix is plywood boxes and heat-resistant finishes plus solar film or better ventilation. Call (833) 620-5631 for an exact quote – estimates are free.
The desert’s low humidity shrinks wood, so cabinets need to acclimate on site for at least 72 hours before install to avoid cracking at the toe-kick and crown. Using moisture-tolerant shims and sealants keeps miters tight long term. We plan for this in every Henderson install. Call (833) 620-5631 to schedule your estimate.
Often, yes – if the boxes and shelf structure are still sound. Refacing swaps doors, drawer fronts, and veneer, which is usually the cost-effective route for the tract homes here. If the boxes are swollen or sagging, replacement is the better answer, and we’ll tell you which applies. Call (833) 620-5631 for a free assessment.
Builder-grade replacement sits near the low end of the $3,720 – $12,090 range, while custom boxes with premium doors and finishes push toward the top. Door construction, finish, and brand all move the number. A written estimate shows every line. Call (833) 620-5631 for your free quote.
Sometimes. The 1970s and 1980s ranches near downtown Henderson can have cast-iron or polybutylene plumbing, and if the sink base comes out that’s the moment to address it. We flag it in the estimate so it isn’t a surprise mid-project. Call (833) 620-5631 to schedule a free estimate.
Ready to see what’s under your current cabinets? Call (833) 620-5631 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Every quote is written line by line, and your kitchen is the only room we remodel.
Written by the team at Kitchen Remodel North Las Vegas.










